To Cancel A Timer Recording In Progress; Check, Change Or Delete Programmes; To Deactivate Timer Programme (E.g. To Interrupt A Daily Or Weekly Timer Programming) - Panasonic DMR-EH58EBL Operating Instructions Manual

Hide thumbs Also See for DMR-EH58EBL:
Table of Contents

Advertisement

Advanced Timer Recording

To cancel a timer recording in progress

While the unit is on
STOP
– Confi rmation screen appears.
 to select "Stop Recording",
then
Notes
 Recording stops and the timer programme is deleted. (Daily and
weekly timer programmes remain and timer recording will start
from the next time the timer recording is set.)

Check, Change or Delete Programmes

The timer recording list can be viewed even when the
unit is off.
programme.
Timer
Recording

Press OK to store new programme.
 Timer Recording screen icons
:
Timer programme is active.
Currently recording
:
:
Programmes are overlapped. Recording of the programme
with the later start time starts when the earlier programme
fi nishes recording.
You stopped a weekly or daily timer recording. The icon
:
disappears the next time the timer recording starts recording.
:
The disc was full. (not enough space)
:
The TV programme may not be recorded due to copy-
protect.
Recording stopped (Dirty disc, etc.)
:
:
Timer programmes set to Auto Renewal Recording
(
33).
:
Titles that have been rerouted to the HDD
(Displayed while recording.)
HDD Recording drive is set to HDD
DVD
Recording drive is set to DVD
 Drive space
OK:
Recordable
(Date): For recordings made daily or weekly, the display will
show until when recordings can be made (up to one
month ahead from the present time) based on the time
remaining on the disc.
!:
It may not be possible to record because:
– there is no more space left.
– the number of possible titles has reached its maximum.
Relief:
Timer programmes that will be relief recorded to the HDD.
Downloaded From DvDPlayer-Manual.com Panasonic Manuals
32
OK
, then ,  to select the
Remain
HDD
30:24 SP
DVD
1:58 SP
FRI 10/10/08 12:54:00
HDD
Drive
No.
Name
Date
Start
Stop
DVD
Mode
space
New Timer Programme
OK
RETURN
DELETE
2a
– You cannot delete programmes that are
currently recording.
OK
2b
, ,,to make changes,
then
Tips
 You can enter up to 32 programmes a month in advance.
You can also delete a programme with the following steps
1. Press [, ] to select the programme, then press [OPTION].
2. Press [, ] to select "Delete", then press [OK].
To exit the timer recording list
Press [PROG/CHECK].
Notes
 Recording may fail if there are changes to the station's
programming.
 "" disappears from the unit's display when no timer programme
is set or when all timer programmes are deactivated.
 Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
To deactivate timer programme
(e.g. to interrupt a daily or weekly timer
programming)

Aft
After performing step  of "Check, Change or Delete
f
i
Programmes" (
AUDIO
(Red)
– "" (
recording list.
– Press the "Red" button again to activate timer
programme.
Tips
You can deactivate the timer programme in the following
procedure as well.
Perform step  (
1. Press [OPTION]
2. Press [, ] to select "Timer Off", then press [OK].
to delete.
to modify the programme.
OK
t
 f "Ch
k Ch
left)
left) disappears from the timer
above)
D l t

Advertisement

Table of Contents
loading

Table of Contents