Table of Contents
Advertisement
Linked Operations with the TV (VIERA Link "HDAVI Control
You can enjoy linked operations with the TV and receiver by using "VIERA Link" or Q Link.
What is VIERA Link "HDAVI Control"?
VIERA Link "HDAVI Control" is a convenient function that
offers linked operations of this unit, and a Panasonic TV
(VIERA) or receiver under "HDAVI Control". You can use this
function by connecting the equipment with the HDMI cable.
See the operating instructions for connected equipment for
operational details.
VIERA Link "HDAVI Control", based on the control functions
provided by HDMI which is an industry standard known as HDMI
CEC (Consumer Electronics Control), is a unique function that
we have developed and added. As such, its operation with other
manufacturers' equipment that supports HDMI CEC cannot be
guaranteed.
This unit supports "HDAVI Control 3" function.
"HDAVI Control 3" is the newest standard (current as of
December, 2007) for Panasonic's HDAVI Control compatible
equipment.
This standard is compatible with Panasonic's conventional HDAVI
equipment.
Please refer to individual manuals for other manufacturers'
equipment supporting VIERA Link function.
Preparation:
1. Connect this unit to your TV using an HDMI cable and a fully wired
21-pin Scart cable (
cable (
76).
2. Set "VIERA Link" to "On" (
3. Set the "HDAVI Control" operations on the connected equipment
(e.g., TV).
Set the input channel on VIERA to suit the terminal to be
used as "HDAVI Control".
4. Turn on all "HDAVI Control" compatible equipment and select
this unit's input channel on the connected TV so that the "HDAVI
Control" function works properly.
Also when the connection or settings are changed, repeat this
procedure.
Download from
the TV
[VIERA]Link]
3
[Q]Link]
(When the TV is on)
Easy playback
[VIERA]Link] [Q]Link]
(When the TV is off)
Power on link
[VIERA]Link] [Q]Link]
Power off link
[VIERA]Link] [Q]Link]
Direct TV
Recording
[VIERA]Link]
3
[Q]Link]
1
This button is available only when this unit is on.
2
When this button is pressed, the playback image is not immediately displayed on the screen and it may not be possible to watch the
Downloaded From DvDPlayer-Manual.com Panasonic Manuals
contents from where playback started.
42
In this case, press [] or [] to go back to where playback started.
3
This function is available with the TV which has "HDAVI Control 3" function.
[VIERA\Link]
12), or to your receiver using an HDMI
71). (The default setting is "On".)
When you connect the unit to a TV for the fi rst time, the station list data is automatically
copied from the TV to the unit and the TV stations are assigned to the programme
positions on the unit in the same order as on the TV (
When the TV is on and the following operations are performed, the TV's input will
automatically switch to HDMI input mode (
TV displays the corresponding action.
(Picture or sound may not be available for the fi rst few seconds.)
Press [FUNCTION MENU]
[PROG/CHECK] etc.
When the TV is off and the following operations are performed, the TV will
automatically turn on and display the corresponding action.
(Picture or sound may not be available for the fi rst few seconds.)
Press [FUNCTION MENU]
[PROG/CHECK] etc.
[DVD-V] [CD] [VCD] SVCD and MP3
The TV is automatically turned on when you insert the discs.
When you turn the TV off, the unit is also automatically turned off. The unit is automatically
turned off even if the FUNCTION MENU screen, the status message or the on-screen display is
displayed, during playback or when the unit is set to a timer recording.
Even if the TV is turned off, the unit will not be turned off at the same time when recording, copying, fi nalising etc,
When this unit is connected to an "HDAVI Control" compatible Panasonic receiver with an HDMI cable, the
receiver will also turn off.
This function allows you to immediately start recording the programme that you are
viewing on the TV (
The titles are recorded to the HDD.
To stop recording
Press [ STOP].
What is Q Link?
Q Link is a convenient function that offers linked operations of this
unit and a Panasonic TV. You can use this function by connecting
the equipment with a fully wired 21-pin Scart cable.
Preparation:
Connect this unit to your TV with a fully wired 21-pin Scart cable
(
10, 11).
Notes
The following systems from other manufacturers have similar
function to Q Link from Panasonic.
For details, refer to your television's operating instructions or
consult your dealer.
Q Link (registered trademark of Panasonic)
DATA LOGIC (registered trademark of Metz)
Easy Link (registered trademark of Philips)
Megalogic (registered trademark of Grundig)
SMARTLINK (registered trademark of Sony)
[VIERA\Link]
1
2
, [
PLAY]
, [DIRECT NAVIGATOR], [VIDEO Plus+],
1
2
, [
PLAY]
, [DIRECT NAVIGATOR], [VIDEO Plus+],
27).
"/Q Link)
TM
[Q\Link]
13).
) or AV input mode (
) and the
[Q\Link]
Advertisement
Table of Contents
