Advanced Timer Recording; Series Recording (Digital Broadcast Only); How View - Panasonic Diga DMR-EX99V Operating Instructions Manual

Advanced timer recording

[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW] [VHS]
Series recording
(Digital broadcast only)
(Except for [VHS])
You can record all the episodes of a series by setting just one timer
recording using the GUIDE Plus+ system.
After performing steps 1-2 (
1
While "Selection Screen" is displayed,
Select "Series Timer Rec.".
Selection Screen
Tue 12.10.10 12:54
Tue 12.10.10
OK
RETURN
∫ To check the schedule of the series
Press the "Blue" button in the "Selection Screen".
Series Information
Tue 12.10.10 12:54
Name Date

5.12. Wed Decameron 1
ABC1
21:30-22:30
12.12. Wed Decameron 2
S
ABC1
21:30-22:30
19.12. Wed Decameron 3
S
ABC1
21:30-22:30
26.12. Wed Decameron 4
S ABC1
21:30-22:30
3. 1. Wed Decameron 1
ABC1
21:30-22:30
:The episode to be recorded
S
The same icon is also displayed on the GUIDE Plus+ list.
:Repeat programme
R
Note
≥This unit automatically records the programmes that are identified
to be of the same series by the GUIDE Plus+ data.
≥The series recording will be cancelled if there has been no episode
of the series for 13 weeks.
≥Titles recorded using series recording are bundled and displayed
as a "group" in the DIRECT NAVIGATOR screen (
when using Auto Renewal Recording.
≥If the same episode has already been set for series timer recording
at a different time or on another channel, "Series Timer Rec." will
not be selectable in the "Selection Screen".
≥If the unit cannot record the first run, the unit will record the repeat
programme if it is available. However, this unit will not record the
repeat programme, if any part of the first run is recorded.
≥You cannot change Channel and Date in Timer Recording screen.
You can set the start time earlier and the end time later by some
minutes, up to a maximum of 10 minutes.
VQT2J46
32
23)
View
Single Timer Rec.
Series Timer Rec.
Delete
Series Info
Contents
R
39) except
Using S V number to make timer
HOW IEW
recordings (Analogue broadcast only)
Entering S V numbers is an easy way of timer recording. You
HOW IEW
can find these numbers in TV listings in newspapers or magazines.
1
Press [ShowView].
ShowView Remain HDD 30:24 SP DVD
Record
VHS 2:59 SP TUE 12.10.10. 12:53:00
Input ShowView Number 0-9, and press OK.
2
Press the numbered buttons to enter
the S V number.
HOW IEW
Press [2] to move back to correct a digit.
3
Press [OK].
Timer
Remain HDD 30:24 SP DVD
Recording
VHS 2:59 SP
TUE 12.10.10. 12:53:00
Channel Date Start Stop Drive Mode
1 ARD 19. 10. TUE 16:00 17:00 HDD SP
All Channels : ARD
Programme Name
≥Make corrections if necessary using [3, 4, 2, 1]
( 33, step 3).
≥When "-- ---" appears in the "Channel" column, you cannot
set timer recording. Press [3, 4] to select desired
programme position. After you have entered the information
of a TV station, it is kept in the unit's memory.
4
Press [OK].
The timer programme is stored and the timer icon is displayed.
Timer icon
"F" lights on the unit's display to indicate timer recording
standby has been activated.
2:59 SP
TUE 12.10.10. 12:56:00
Drive
Stop Drive Mode STTL space
17:00 HDD SP −−−
OK
Programme
Repeat steps 1–4 to programme other recordings.
Press [Í] to turn the unit off.
1:58 SP
1:58 SP
STTL
−−−
No. Channel

01
ARD
e.g.,
Check to make sure "OK" is
displayed ( 33).