Maintenance Schedule - Toro 07213TC Operator's Manual

Liquid-cooled diesel utility vehicle
Hide thumbs Also See for 07213TC:
Table of Contents

Advertisement

Minimum Recommended Maintenance Intervals
Maintenance Procedure
Check battery fluid level/
cable connections
‡Check dust cup/baffle
Lubricate all grease fittings
Inspect the condition and wear of the tires
Check front differential oil level (4WD)
‡Change engine oil and filter
Inspect cooling system hoses
✝Check cable adjustments
✝Check alternator and fan belts
Service the air filter
Check front axle boot joint (4-wheel drive)
Check engine RPM (idle and full throttle)
✝Torque the wheel lug nuts
Check front wheel alignment
Inspect service and parking brakes
Inspect fuel lines
Replace electric fuel pump filter
‡Torque cylinder head and adjust valves
✝Replace the transaxle filter
Change the transaxle oil
Clean the transaxle strainer
Change the front differential oil (4-wheel drive)
Pack the front wheel bearings
Initial break in at 10 hours
Initial break in at 50 hours
Replace all interlock switches
Flush the cooling the cooling system and replace fluid
Drain and flush the fuel tank
Change the brake fluid

Maintenance Schedule

Every 50
hours
Maintenance Interval& Service
Every
Every
100
200
hours
hours
Annual Recommendations
Items are recommended every 1200 hours
or 2 years, whichever occurs first.
50
Every
Every
400
800
hours
hours

Advertisement

Table of Contents
loading

This manual is also suitable for:

07217tcWorkman 3300-dWorkman 4300-d

Table of Contents