Sound Pressure Level; Vibration Level - Toro 03806 Operator's Manual

it has stopped because these areas could be hot
enough to cause burns.
• If a cutting unit strikes a solid object or vibrates
abnormally, stop immediately, turn the engine
off, wait for all motion to stop, and inspect
the machine for damage. A damaged reel or
bedknife must be repaired or replaced before
operation is continued.
• Traverse slopes carefully. Do not start or stop
suddenly when traveling uphill or downhill.
• The operator must be skilled and trained in
how to drive on hillsides. Failure to use caution
on slopes or hills may cause loss of control
and cause the vehicle to tip or roll, possibly
resulting in personal injury or death. On 4
wheel drive models, always use the seat belt and
Roll Over Protection System (ROPS) together.
• If the engine stalls or loses headway and cannot
make it to the top of a slope, do not turn the
machine around. Always back slowly, straight
down the slope.
• When a person or pet appears unexpectedly
in or near the mowing area, stop mowing.
Careless operation, combined with terrain
angles, ricochets, or improperly positioned
guards can lead to thrown object injuries. Do
not resume mowing until the area is cleared.
• Do not park on slopes unless the wheels are
chocked or blocked.
Maintenance and Storage
• Make sure all hydraulic line connectors are
tight and all hydraulic hoses and lines are in
good condition before applying pressure to the
system.
• Keep your body and hands away from pin hole
leaks or nozzles that eject hydraulic fluid under
high pressure. Use paper or cardboard, not
your hands, to search for leaks. Hydraulic fluid
escaping under pressure can have sufficient
force to penetrate the skin and cause serious
injury.
• Before disconnecting or performing any work
on the hydraulic system, all pressure in the
system must be relieved by stopping the engine
and lowering the cutting units and attachments
to the ground.
• If the engine must be running to perform a
maintenance adjustment, keep hands, feet,
clothing, and any parts of the body away from
the cutting units, attachments and any moving
parts. Keep everyone away.
• The engine must be shut off before checking
the oil or adding oil to the crankcase.
• If major repairs are ever needed or if assistance
is desired, contact an Authorized Toro
Distributor.
• To make sure of optimum performance and
continued safety certification of the machine,
use only genuine Toro replacement parts
and accessories. Replacement parts and
accessories made by other manufacturers could
be dangerous, and such use could void the
product warranty.

Sound Pressure Level

This unit has an equivalent continuous A-weighted
sound pressure at the operator ear of: 86 dB(A),
based on measurements of identical machines per
Directive 98/37/EC and amendments.

Vibration Level

This unit does not exceed a vibration level of
2.5 m/s² at the hands based on measurements of
identical machines per ISO 5349 procedures.
This unit does not exceed a vibration level of
.5 m/s² at the posterior based on measurements of
identical machines per ISO 2631 procedures.
6