Toro 03806 Operator's Manual page 21

• One of the outputs has been shorted.
• One of the outputs is open circuited.
Using the diagnostic display, determine which
output is malfunctioning, refer to Checking
Interlock Switches in Operation, page 22.
If the diagnostic light is not illuminated when
the key switch is in the On position, this
indicates that the electronic controller is not
operating. Possible causes are:
• Loopback is not connected.
• The light is burned out.
• Fuses are blown.
• No battery power.
Check electrical connections, input fuses and
diagnostic light bulb to determine malfunction.
Make sure loopback connector is secured to
wire harness connector.
Diagnostic ACE Display (Optional)
The machine is equipped with an electronic
controller which controls most machine functions.
The controller determines what function is
required for various input switches (i.e. seat
switch, key switch, etc.) and turns on the outputs
to actuate solenoids or relays for the requested
machine function.
For the electronic controller to control the
machine as desired, each of the input switches,
output solenoids and relays must be connected
and functioning properly.
The Diagnostic ACE display is a tool to help
the user verify correct electrical functions of the
machine.
Specications
Note: Specifications and design are subject to
change without notice.
Width-of-cut, model
03806 and 03807
Width-of-cut, model
03808
Overall width, Transport
Overall width, Operational
Overall length
* With 5 blade cutting units and full fluid levels
Attachments/Accessories
A selection of Toro approved attachments and
accessories are available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or Distributor or
go to www.Toro.com for a list of all approved
attachments and accessories.
96 inches (244 cm)
133 inches (338 cm)
89 inches (226 cm)
110 inches (279 cm)
120 inches (305 cm)
21
Height With ROPS installed
Weight*, model 03806
Weight*, model 03807
Weight*, model 03808
84 inches (213 cm)
3200 lb (1451 kg)
3300 lb (1496 kg)
3950 lb (1792 kg)