Recommended Maintenance Schedule - Toro 44044 Operator's Manual

Recommended Maintenance Schedule

Maintenance Service
Interval
After first 5 hours
After first 10 hours
Every 25 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 600 hours or
annually, whichever
occurs first
Maintenance Procedure
• Change engine oil and filter.
• Check reel drive belts.
• Torque wheel lug nuts.
• Clean and lubricate foam pre–cleaner.
• Clean reel drive area.
• Check reel drive belts.
• Check battery fluid level.
• Lubricate gate pivots.
• Lubricate all grease fittings.
• Check battery cable connections.
• Change engine oil and filter.
• Replace air filter.
• Clean air intake/cooling areas.
• Check reel fingers.
• Replace fuel filter.
• Inspect condition of tires.
• Adjust steering chain.
• Torque wheel lug nuts.
• Service spark plugs.
• Check electric brake clutch air gap.
• Check engine RPM (idle and full throttle).
• Drain and flush fuel tank.
• Inspect hopper and gate for damage.
• Replace hydraulic fluid and filter.
33