Related Manuals for Toro PowerPlex 40V MAX
Summary of Contents for Toro PowerPlex 40V MAX
- Page 1 Form No. 3424-856 Rev A PowerPlex 40V MAX Axial Blower Model No. 51690—Serial No. 319000001 and Up Model No. 51690T—Serial No. 319000001 and Up *3424-856* A Register at www.Toro.com. Original Instructions (EN)
- Page 2 You are responsible for operating the product properly and safely. You may contact Toro directly at www.Toro.com for product and accessory information, help finding a dealer, complete warranty details, or to register your product.
- Page 3 Safety enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose WARNING: When using electric gardening appliances, clothing or jewelry. Keep your hair tied always follow basic safety precautions to reduce back and keep your hair, clothing, and the risk of fire, electric shock, and personal injury, gloves away from venting areas Loose including the following:...
-
Page 4: Safety And Instructional Decals
The battery or conductor may overheat and Use only the following type and size cause burns. battery(ies): Toro battery Model 88540 or SAVE THESE INSTRUCTIONS 88541. Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. - Page 5 decal136-2476 136-2476 1. The battery pack is 3. The battery pack is too charging. warm. 2. The battery pack is fully 4. Replace the battery pack. charged. decal136-2534 136-2534 1. The battery does not 4. Stop—follow these come out of the box fully instructions before first charged.
-
Page 6: Assembling The Blower
Assembling the Blower Setup Slide the blower tube onto the blower housing. Note: The battery pack is not fully charged when you You may need to press down on the tab for the purchase it. Before using the tool for the first time, blower tube to lock into place (Figure refer to... -
Page 7: Product Overview
Product Overview Operation Specifications WARNING The blower can throw debris, possibly Appropriate Temperature Ranges causing serious personal injury to you or Charge the battery at 0°C (32°F) to 40°C (104°F)* bystanders. Use products at -15°C (5°F) to 60°C (140°F) • Do not blow hard objects, such as nails, Store products at -15°C (5°F) to 60°C (140°F) bolts, or rocks. - Page 8 Adjusting the Air Speed of Removing the Battery from the Blower the Blower To accelerate the blower speed, press and hold the Press down on the battery latch to separate the turbo boost button for the desired amount of time battery from the blower (Figure (Figure...
-
Page 9: Charging The Battery Pack
Charging the Battery Pack Important: Read all safety precautions. Important: Charge the battery pack only in temperatures that are within the appropriate range; refer to Specifications (page Note: At any time, press the battery-charge-indicator button on the battery pack to display the current charge (LED indicators). - Page 10 4 LED indicators turn blue on www.Call2Recycle.org (US and Canada only). the battery. If you are located outside of the US and Canada, please contact your authorized Toro • Disconnect the product from the power supply distributor.
-
Page 11: Troubleshooting
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem Possible Cause Corrective Action The battery pack loses charge quickly. - Page 12 While the exposure from Toro products may be negligible or well within the “no significant risk” range, out of an abundance of caution, Toro has elected to provide the Prop 65 warnings. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.