Recycling Supplies - Xerox WorkCentre 6027 User Manual

Maintenance
Refreshing the Toner
Toner Refresh recalibrates toner concentration and developer voltages. If you print documents with high
or low ink coverage, Toner Refresh can optimize print quality.
To refresh the toner:
At the printer control panel, press the Machine Status button.
1.
2. Touch Tools, then touch Admin Settings.
3. Using the keypad, type the passcode as needed.
Touch Service Tools.
4.
5. Touch Toner Refresh.
Touch the toner color to refresh, then touch Refresh.
6.
The process runs automatically. Wait one minute for the process to complete and the printer to
return to Ready mode.
Note: Do not use this procedure repeatedly. Running the procedure repeatedly uses the toner supply
more quickly.
Cleaning the Developer
The Clean Developer feature runs the developer motor and stirs the toner in the toner cartridge. Use
Clean Developer to clean toner from a cartridge just before changing it or to refresh the toner after
replacing a toner cartridge.
To clean the developer:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
Touch Service Tools, then touch Clean Developer.
3.
4. Touch Start > Start.
Wait one minute for the process to complete and the printer to return to Ready mode.
5. To return to the Maintenance menu, touch Close.

Recycling Supplies

For more information on the Xerox
®
170 Xerox WorkCentre
User Guide
®
supplies recycling program, go to: www.xerox.com/gwa.
®
6027 Multifunction Printer