Checking The Steering Head Bearing Play - KTM 350 EXC-F Owner's Manual

Hide thumbs Also See for 350 EXC-F:
Table of Contents

Advertisement

12
SERVICE WORK ON THE CHASSIS
12.15

Checking the steering head bearing play

Warning
Danger of accidents Unstable vehicle handling from incorrect steering head bearing play.
Adjust the steering head bearing play without delay. (Your authorized KTM workshop will be glad to help.)
Info
If the bike is ridden with play in the steering head bearing, the bearing and the bearing seats in the frame can become dam-
aged over time.
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front brake caliper
Mount cable binder
Position the brake line, wiring harness, and clamp. Mount and tighten screws
101326-11
Finishing work
Mount the handlebar cushion.
Install the front fender. (
Install the front wheel.
Refit the headlight mask with the headlight. (
Check that the wiring harness, throttle cables and brake and clutch lines can move
freely and are routed correctly.
Check the steering head bearing play. (
Remove the motorcycle from the lift stand. (
Check the headlight setting. (
Preparatory work
Raise the motorcycle with the lift stand. (
Main work
Move the handlebar to the straight-ahead position. Move the fork legs to and fro in
the direction of travel.
No play should be noticeable in the steering head bearing.
»
If there is noticeable play present:
(EXC‑F EU/AU/BR, XCF‑W)
(EXC‑F Factory Edition, All Six Days models)
400738-11
Move the handlebar to and fro over the entire steering range.
The handlebar must be able to move easily over the entire steering range. No
resting locations should be noticeable.
»
If click positions are noticeable:
(EXC‑F EU/AU/BR, XCF‑W)
(EXC‑F Factory Edition, All Six Days models)
Check the steering head bearing and replace if required.
Finishing work
Remove the motorcycle from the lift stand. (
M8

.
p. 60)
(
p. 84)
p. 95)
Adjust the play of the steering head bearing.
Adjust the play of the steering head bearing.
Adjust the play of the steering head bearing.
Adjust the play of the steering head bearing.

.
25 Nm
Loctite
(18.4 lbf ft)
p. 93)
p. 58)
p. 48)
p. 48)
(
p. 59)
(
p. 59)
(
p. 59)
(
p. 59)
p. 48)
58
®
243™

.

Advertisement

Table of Contents
loading

This manual is also suitable for:

350 xcf-w

Table of Contents