Overview Of A Quick Check Of The Device Status - Kärcher HDS 7/12 M Service Manual

7.46 Overview of a quick check of the device status

Read the fault memory in service mode at 70 (52/44)°C.
Every fault type is saved only once, together with the
passed hours since it has last occurred.
Overvoltage detected hours ago:
Low voltage range detected hours ago:
Excess current detected hours ago:
Current asymmetry detected hours ago:
Tripped winding protection motor detected hours ago:
2 minutes dry running detected hours ago:
Stuck water shortage safeguard detected hours ago:
Oil shortage in pump detected hours ago:
Leakage (10 short startups) detected hours ago:
Triggered exhaust gas thermostat detected hours ago:
Faulty temperature sensor for water detected in hours:
Flame sensor detects too little light hours ago:
Flame sensor detects light hours ago:
Reading error RFID electronics detected hours ago:
OOOO end of the fault memory reached.
OOOO display of the software version.
110
English 5.906-432.0 Rev. 00 (06/15)
Advance with "SET".