Kärcher HDS 7/12 M Service Manual page 61

1 Detergent tank 1
2 Detergent suction hose with filter
3 Level sensor, detergent tank 1
4 Detergent suction hose with filter
5 Level sensor, detergent tank 2
6 Detergent tank 2
7 Suction hose with filter and check valve
8 Open container
9 Dosage valve for detergent
10 Suction hose for detergent
11 Detergent check valve
12 Pressure switch ON
13 Pressure and volume regulation
14 Oil tank
15 Fuel filter
16 Fuel tank
17 Level sensor for fuel tank
18 Fuel suction hose
19 Fuel return line
20 Fuel pump
21 Solenoid valve, fuel pump
22 Continuous heater
23 Fuel pressure line
24 Ignition electrodes
25 Fuel nozzle
26 Exhaust nozzle
27 Exhaust temperature sensor
28 Setting, water temperature
29 Printed circuit board (PCB)
30 Temperature sensor
31 Heating coil
32 Air flap
33 Water fine filter
34 Burner blower
35 Motor casing with cooling coil
36 Pressure switch OFF
37 Safety block with water shortage safeguard and safety
valve
38 Manometer
39 Pressure pipe
40 Solenoid valve liquid softener
41 Level sensor liquid softener
42 Liquid softener reservoir
43 Swimmer valve
44 Float tank
45 High pressure nozzle
46 Spray lance
47 Trigger gun
48 High pressure hose
49 Rotary regulator for pressure and quantity regulation
50 Rinse line
51 Slot (plug) vacuuming operations
52 Hose to the fine filter
53 Hose from the motor cooling to the pump
Note
During vacuuming operations, the float container must be
bypassed.
61
English 5.906-432.0 Rev. 00 (06/15)