Rfid Query; Testing The Temperature Sensor - Kärcher HDS 7/12 M Service Manual

7.8

RFID query

Function
45 °C RFIDONOFF
+ Information to the printed
„SET" circuit board whether the
device is equipped with
(40/-- °C feed via RFID.
+
„SET")
7.9

Testing the temperature sensor

Function
50 °C NTCTEST
(43/36 °C) Display of the water tem-
perature measured by the
temperature sensor.
The value is shown digit
by digit by the LEDs.
Example:
A temperature of 27°C is
measured.
The LEDs light up in the
following order:
- PAUSE -
Note
At a temperature below 0?, "0" is displayed.
78
English 5.906-432.0 Rev. 00 (06/15)
Adjustments
LED indicator
Adjustments
LED indicator
...
Important
Device with RFID Menu access:
Select 45°C
Switch off device. Hold
SET. Turn on the ma-
chine. Release SET.
Select settings with
Device without
SET.
RFID
Check the setting
when replacing
the printed circuit
board.
Important
Digit value "0"
Digit value "1"
Digit value "2"
Digit value "3"
Digit value "4"
Digit value "6"
...