If Unit - Furuno FSV-35 Installation Manual

2. WIRING
2.4

IF Unit

The IF unit installs between the processor unit and the transceiver unit. Connect the
cables according to the diagram inscribed on the shield cover of the IF unit. JIS cables
and FURUNO cables are available for the connection. To connect the JIS cables, use
the larger cable holes as shown below.
Select a location that provides the maintenance space prescribed in the outline draw-
ing. Follow the compass safety distance in the Safety Instructions to prevent interfer-
ence to a magnetic compass.
Processor Unit
(10S2383, 3 m)
Control Unit
10S2884
(5/10 m)
Ground wire
Processor Unit
(local supply, IV-2sq)
(19S1050, 3 m)
Connection point
Ext. KP JIS cable*
FURUNO cable
Gyro JIS cable*
FURUNO cable
Transceiver Unit FURUNO cable
CIF1 JIS cable*
FURUNO cable
CIF2 JIS cable*
FURUNO cable
*: JIS=Japan Industrial Standard. See the appendix for equivalent cable.
Braided
shield
2-6
Cable entrance for
external equipment
Cable type See (1) below
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
400 mm
Core
5
(1)
(2)
5
(1)
Gyrocompass (GYRO)
External KP (EXT KP)
MPYC-12 or equivalent
CIF1
CIF2
CIF1 or CIF2
(TTYCSLA-1 or equivalent)
See (2) below
100 mm
120 mm
100 mm
100 mm
100 mm
100 mm
100 mm
120 mm
120 mm
Sheath
Armor
45
5
Aluminium tape
TTYCSLA-4 or equivalent
Transceiver Unit (TRX)
10S2380 or equivalent
Not used.
Remarks
Standard supply