Control Unit And Remote Controller - Furuno FSV-35 Installation Manual

2.5

Control Unit and Remote Controller

Ground
Connect a IV-1.25 sq ground wire (local supply) between the ground terminal on the
control unit and the ship's ground.
How to connect the remote controller
Connect the optional remote controller (FSV-854) as shown below.
1. Unfasten the six panhead screws at the bottom of the control unit to detach the
cover.
2. Cut a cross in the grommet on the cover then pass the remote controller cable
through the grommet.
Control unit cable
(10S2884)
Rear side of the control unit (cover removed)
Rear side of the control unit (cover removed)
Grommet
2. WIRING
Remote controller
cable
2-9