MAINTENANCE WORK ON FRAME AND ENGINE
Removing the front wheel
9.33
–
Check the brake linings for minimum thickness
Minimum thickness
»
If the minimum thickness is less than specified:
–
Change the rear brake linings.
–
Check the brake linings for damage and cracking.
»
If there is wear or tearing:
–
Change the rear brake linings.
100563-10
x
–
Jack up the vehicle on the center stand. (
–
Bear down on the rear of the vehicle or jack it up on the underride guard.
The front wheel is not in contact with the ground.
–
Press the brake calipers by hand on to the brake discs in order to press back the brake
pistons.
100605-10
.
≥ 1 mm (≥ 0.04 in)
x
x
p. 65)
98