MAINTENANCE WORK ON FRAME AND ENGINE
Changing the parking light bulb in the headlight
9.57
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Remove the headlight mask with the headlight. (
–
Remove rubber cap
100592-10
–
Detach spring bar
–
Position the new bulb in the headlight and attach the spring bar.
Low beam (H7 / socket PX26d) (
Info
The bulb must be positioned with projection
–
Attach the connector to the bulb and mount the rubber cap.
–
Install the headlight mask with the headlight. (
100593-10
and connector
from the bulb.
and remove the bulb from the headlight.
p. 190)
p. 125)
in the recess.
p. 126)
128