MAINTENANCE WORK ON FRAME AND ENGINE
Installing the headlight mask with the headlight
9.54
Changing the high beam bulb
9.55
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
–
Disconnect plug-in connector
–
Place the headlight mask down on a soft cloth to prevent the headlight and trim disc
from being damaged.
100591-10
–
Connect plug-in connector
–
Check the lighting function.
–
Position the headlight mask.
–
Install the front side cover. (
–
Check the headlight setting. (
100591-10
.
.
p. 124)
p. 132)
126