Getting Started / Selecting A Program; Finishing Your Workout; Clear Current Selection - Horizon Fitness Cst 3.6 club series User Manual

GETTIN G S TA R T ED / S EL EC T I N G A P ROG RA M
1)
Check to make sure nothing is on or will hinder the movement of the treadmill.
2) Plug in the power cord and turn the treadmill ON.
3) Stand on the side rails of the treadmill.
4)
Attach the safety key clip to part of your clothing.
)
Insert the safety key into the safety keyhole in the console.
6) You have two options to start your workout:
A) QUICK START UP
Simply press the START key to begin working out. OR...
B)
SELECT A PROGRAM
Select a PROGRAM using the PROGRAM +/- or QUICK PROGRAM keys.
Once a PROGRAM has been chosen, press ENTER.
SELECT A LEVEL
Select a PROGRAM LEVEL using the PROGRAM +/- keys.
Once a PROGRAM LEVEL has been chosen, press ENTER.
SELECT A TIME
Select a Time using the PROGRAM +/- keys or use the default time.
Once a TIME has been chosen, press START.

FINISHING YOUR WORKOUT

When your workout is complete, the MONITOR DISPLAY will flash and beep. Your workout information will stay
displayed on the console for 30 seconds and then reset.

CLEAR CURRENT SELECTION

To clear the current program selection or screen, hold the STOP button for 4-5 seconds.
Downloaded from www.Manualslib.com manuals search engine
1