Gateway E-9425R User Manual page 67

www.gateway.com
Install the processor and heatsink by following the instructions in
15
"Replacing or adding a processor" on page
Reinstall the PCI riser assembly by following the instructions in
16
and removing PCI expansion cards" on page
Reinstall the system fans and fan cage by following the instructions in
17
"Replacing system fans" on page
Follow the instructions in
18
Turn on your server, then press F2 when the Gateway logo screen appears
19
during startup. The BIOS Setup utility opens.
Check BIOS settings to make sure that they detect the server's new
20
hardware, then save your changes (if any) and close the BIOS Setup utility.
If your server does not start after installing the new system board, contact
21
Gateway Customer Care. For more information, see
page 9.
Replacing the system board
48.
43.
46.
"Closing the server case" on page
"Installing
32.
"Getting Help" on
61