Sharp MX-3050N User Manual page 275

COPIER►OTHER FUNCTIONS
Insertion
sheet
Insert an insertion sheet in 1-sided copy mode.
setting
conditions
2-sided copy
Makes a 2-sided copy of the third and fourth original pages on an
insertion sheet.
2-sided original copying
Insertion
sheet
Insert an insertion sheet in 1-sided copy mode.
setting
conditions
1
Not copied
Inserts an insertion sheet between the second and third pages of
copies.
1
1-sided copy
Makes a 1-sided copy of the third original page on an insertion
sheet.
2-sided copy
Makes a 2-sided copy of the third and fourth original pages on an
insertion sheet.
• Before using the covers/inserts function, load insertion sheets in the tray.
• When selecting the covers/inserts function, place the originals in the document feeder tray, select 1-sided or 2-sided
copying, and select the number of copies and any other desired copy settings. When these settings have been completed,
perform the procedure to select covers/inserts.
• The insertion sheet size must be the same as the copy size.
• Up to 100 insertion sheets can be inserted.
• The document glass is not available for this function.
• Take care that two insertion sheets cannot be inserted into the same page.
• When performing 2-sided copying of 2-sided originals, an insertion sheet cannot be inserted between the front and reverse
sides of an original.
• This function cannot be used in combination with the saddle stitch function.
• This setting is not available when the covers/inserts function is disabled in "Settings (administrator)".
1 2 5
3
2 3
2 3 4
1 2 3 5
Resulting copies
6
Resulting copies
4 5 6
5 6
6
2-113
Insert an insertion sheet in
2-sided copy mode.
1 3 5
Insert an insertion sheet in
2-sided copy mode.
1 3
5
1 3
* The fourth original page is not
copied.
1 3 5
5