Fold Setting - Sharp MX-3050N User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES

FOLD SETTING

This function is used to fold copies before delivery to the output tray.
• To change the default fold setting:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Fold].
• A saddle stitch finisher or saddle stitch finisher (large stacker), is required to use the fold function.
• The fold function cannot be used in combination with the staple function and punch function.
• The folding function cannot be combined with the staple function or punch function.
• You can check the selected folding method in
Tap the [Detail] key to change to normal mode.
1
► Changing mode from each mode (page 2-5)
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
Tap the [Others] key, and tap the [Fold] key.
2
3
Others
Fold
Off
Fold Inside
Fold Outside
Back
Fold Inside
"PREVIEW SCREEN (page
Register This Function
in Favorite
Original
Change Size/Direction.
Sort/Group
Change Sort/Group
Erase
Erase Shadow Around
Book Copy
Copy 2-facing Pages of a Book
Preview
Offset
Output Tray
B/W Color
Start Start
4 11x17
Fold Outside
1-17)".
Select the folding method.
After the settings are completed, tap
CA
2-46
.