Sharp MX-3050N User Manual page 470

FACSIMILE►OTHERS FUNCTION
• The settings stored in a program will be retained even after the program is used for transmission. The same settings can
be used repeatedly for transmission.
• The following contents cannot be stored in programs:
• Tapping the [Speaker] key, Quick File, File, page move and unspecified erase during preview, Metadata Entry, Send
Settings, and Own Name Select.
• Up to 48 programs can be stored.
• Up to 500 destinations can be stored in one program.
• A program in which sub addresses and passcodes are specified as an F-code destination records all sub addresses and
passcodes.
Place the original.
1
According to the function stored in the program, place the original in the document feeder tray of the automatic
document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-78)
► DOCUMENT GLASS (page 1-80)
Tap [Call Program] on the action panel.
2
3
Address Fax Number
Address Book
Call Program
Call registered settings when touched.
Pre-Setting Program
01 02
Program1
03 04
03
05 06
05
07 08
07
09 10
09
Others
reception memory
Configure additional settings as required.
4
Some settings cannot be added depending on the contents of the called program.
Tap the [Start] key to start scanning of the original.
5
If you inserted the original pages in the document feeder tray, all pages are scanned.
When you place the original on the document glass, scan each page one at a time.
After you have scanned the last original, tap the [Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.
You can tap the [Preview] key to check a preview of the image before sending a fax. For more information, see
"CHECKING THE IMAGE TO BE TRANSMITTED (page
Change Name
Delete
Register in Favorite
Register for Home
02
04
06
Preview
08
10
Start
Speaker
100%
4-71
Tap the desired program key.
CA
4-28)".