Canon ZR 90 Instruction Manual page 89

BiZ·"a:!j Audio Dubbing
You can add sound from audio devices (AUDIO IN) or with the built-in microphone
(MIC.IN).
This function is operated with the wireless controller.
Refer also to the instruction manual of the connected device.
Audio device
(e.g. CD player)
Signal flow
c:=>
STV-250N Stereo Video Cable
(supplied)
1 1 ~looo
~II-I"II
STOP.
+/II~
~ C) C) C)
I
AlllKlDUB, ,
~USEII
SLOWI' x 2
I C) I:=) C) C)
IllGloDD
~~~~ I
AUDIO SETUP
I~I
AUDIO DUB." ·AUDIO IN
1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
Use a tape recorded in Sp, 12-bit mode with this camcorder.
2. Open the menu and select [AUDIO SETUP]. Select [AUDIO DUB.], set it
to [AUDIO IN] or [MIC. IN] and close the menu.
3. Locate the scene you wish to start audio dubbing.
4. Press the PAUSE
II
button on the wireless controller.
5. Press the AUDIO DUB. button on the wireless
controller.
IIAUDIO DUB.
II
and
II:
11
11
appear.
88
6. Press the PAUSE
II
button on the wireless controller
to begin dubbing.
• Audio device: Begin playback.
• Microphone: Speak into the built-in microphone.