Canon ZR 90 Instruction Manual page 84

Recording from Digital Video
Devices IDV Dubbing}
You can record from other digital video devices equipped with a DV terminal with
virtually no loss in picture and sound quality.
PLAY (VCR)
m
C.
;:::;:
:;'
10
-
CAP
I
S1l6~
REC PAUSE
7.
Press the. button to stop recording.
• Press the
111
button to pause recording.
• Press the
111
button again to restart recording.
8. Connected Device: Stop playback.
1. Connect the camcorder to the digital video device.
See Connecting a Digital Video Device (rn 80).
2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.
Make sure that [AV"OV OUT] is set to [OFF]
(0
85).
3. Connected device: Load the recorded cassette.
4. Press the REC PAUSE button.
In record pause mode and during recording, you can check the
picture on the screen.
5. Connected Device: Play back the tape.
6. Press the
"-/11
button when the scene you wish to
record appears.
o
Blank sections may be recorded as anomalous picture.
o
If the picture does not appear, reconnect the DV cable or turn the camcorder
off and back on again.
o
You can only record signals from devices with the
I)"
logo recording in SO
system in SP or LP format.
C::.QPV.ri.ght. . . Sig.(la.J
Certain software tapes are copyright protected. If you attempt to play back such tape,
"COPYRIGHT PROTEaED PLAYBACK IS RESTRlaED" appears and you will not be able
to view the contents of the tape. If you attempt to record from such tape via the DV
terminal, "COPYRIGHT PROTEaED DUBBING RESTRICTED" appears and you will not
be able to record the contents of the tape.
83