Canon ZR 90 Instruction Manual page 28

CD
Time code
Indicates the recording time in hours,
minutes and seconds.
®
Remaining tape
Indicates the remaining time of the tape
in minutes.
[Q"§
END flashes when the
tape reaches the end.
• When the time left IS less than 15
seconds, the remaining tape time may
not appear.
• Depending on the type of the tape,
the indication may not be displayed
correctly.
@ Remaining battery charge
The battery symbol indicates the charge
status of the battery pack.
• c..\J
starts flashing in red when the
battery pack is empty.
• When you attach an empty battery
pack, the power may turn off without
displaying <Ls;J.
• The actual battery charge may not be
indicated accurately depending on the
condition under which battery pack
and camcorder are used.
®
When
~
flashes
6 flashes in red when the lithium
button battery is not Installed, or when
it runs out.
®
Recording reminder
The camcorder counts from 1 to 10
seconds when you start recording. This
is helpful to avoid scenes that are too
short.
-
27