Canon ZR 90 Instruction Manual page 68

Usingthe. . . . l\lIu.ltidmage . . S cr.eel'l·
You can operate the multi-image screen only in the following playback modes:
- When [S.5PEED] is set to [MANUAL]: Playback pause, slow forward/reverse playback
- When [S.5PEEDl is set to [FASTl, [MOD.] or [SLOW]: Playback pause
In CAMERA mode, set the program selector to
IEJ.
CAMERA PLAY (VCR)
1. Press the DIGITAL EFFECTS button.
[D.EFFECTS
oonJ,
[FADER], [EFFECT] and [MULTI-S] appear.
DIGITAL
EFFECTS
~
DIGITAL
EFFECTS
~
2. Select IMULTI-S].
[S.SPEED] and [S.SPLlT] appears.
3. Select IS.SPEED].
[MANUAL], [FAST], [MOD.] and [SLOW] appear.
4. Select the transition speed.
Following transition speeds can be selected: fast (every 4 frames), moderate (every 6
frames*), slow (every 8 frames*).
*
In Low Light mode: moderate (every 8 frames), slow (every 12 frames).
5. Select [MULTI-SI again.
[S.sPEED] and [S.SPLlT] appears.
6. Select IS.SPLlT].
[4], [9], [16] settings appear.
7. Select the number of sequences.
8. Press the DIGITAL EFFECTS button.
"MULTI-S" flashes.
-
9. Press the ON/OFF button.
ON/OFF
• MANUAL: Images will be captured each time you press the
ON/OFF button. The blue frame indicating the next sequence
disappears after the last image. To cancel the last captured
image, press and hold the ON/OFF button. To cancel the
multi-image screen, press and release the ON/OFF button.
• FAST, MODERATE, SLOW: The set number of images will be captured at the set
speed. To cancel the multi-image screen, press the ON/OFF button.
67