Audio Recording - Canon ZR 90 Instruction Manual

Audio Recording
(:bao,giog"·"tbe",AudiQ".",,MQd,e
You can record sound in two audio modes-16-bit and 12-bit. The 12-bit mode records
sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new
sound later. Select the 16-bit mode for higher sound quality.
PLAY (VCR)
CAMERA
'('dj~~
IAUDID SETUP
I~IAUDIO
MODE· .. 12bil
Open the menu and select [AUDIO SETUP]. Select [AUDIO MODE]. set it to
[16bit] and close the menu.
"16bit" appears for approximately 4 seconds.
You can reduce the wind noise when recording in windy places.
CAMERA
PLAY (VCR)
*
CARD CAMERA
*
ZR90lZR85 only.
~~~~ l-A-u-D-,O-s-E-Tu-p------I~I
WIND SCREEN· ·OFF
Open the menu and select [AUDIO SETUP]. Select [WIND SCREEN], set it to
[ON] and close the menu.
"WS
rilll"
appears when you turn the wind screen on.
o
Low sound may be reduced together with the wind noise. We recommend
turning off the wind screen for normal recordings.
o
t".f4'l·Ti· . .
~i:!j
The wind screen function can also be used for audio dubbing
(when [AUDIO DUB] is set to [MIC. IN] in the [AUDIO SETUP} submenu).
60