Canon ZR 90 Instruction Manual page 231

Select the microphone and speakers you wanl to use:
MicroPhon<r8~~
••
lJ~~
• •
\jl£)
2peakersi~~t~ii
ed
s~~~d
dev
i
ce
$ $ $ $ $ <$ '" <$ '" $ $ $ $ '" <$ '" <$ '" <$ $ $ $ $ $ $ <$ '" <$ ,. <$ I/) <$ I/) $1/) $ <I) II! <$@<$"'@>.]$;$$<I)II!$@$I/)<$I/)$;$${)@O@o\$o{)$e$o@o@<$t'<$\$$\$$e@o@<$;$$$ $ e $ $ [,
7.
Set [Microphone] and click [Next].
• If you are connecting a Canon
_111111_11111111111111_
camcorder using a USB cable,
select [Canon USB Video]. If you
are connecting a Canon camcorder
using a DV cable, select [Canon DV
Device].
• The installed sound device appears
for [Speaker]. Proceed with the
setting unchanged.
Keep the volume comforlably low
10
avoid echoes,
Make sure thaI your speakers or headphones are
plugged in and that the volume is acceptable
Click [Click to Test Speakers], adjust the volume and click
[Next].
• Clicking [Click to Test Speakers]
plays back a test sound.
• Move the volume lever with the
mouse to adjust the speaker
volume.
8.
9.
Check if the microphone volume is correctly indicated and click
[Next].
• In NETWORK or CAMERA mode:
Speak into the microphone of your
camcorder and check if the volume
indicator operates correctly.
• In PLAY (VCR) mode: Play back the
tape and check if the volume
indicator operates correctly.
• Sound input with the camcorder via
IEEE 1394 or USB connection cannot
be adjusted with the volume lever.
• The volume indicator will not
operate when the camcorder is in
CARD CAMERA mode.
37