Reduced Curl; Require Standby; A5 Loading - Lexmark MS510 Service Manual

Available options:
•
Off
•
On

Reduced Curl

When on, this setting significantly reduces throughput and should be activated only as a last resort to solve paper curl
problems. The printer uses this mode only when the media type is set to Paper.
Available options:
•
Off
• On

Require Standby

Note: This setting is available only on the MS610de model.
This sets Standby Mode to On or Off. The default is On.
To change the setting:
1
From the Configuration menu, navigate to Require Standby.
2
Select On or Off to change the setting.
3
Depending on the printer model, press OK or touch
menu without saving any changes.
If Standby mode is On, the printer begins functioning in Standby mode when it remains idle for an amount of time.
The Standby mode enables the printer:
•
To consume less energy than when operating in normal mode but not as little as when operating in Power saver.
• To return to the Ready state more quickly than when operating in power saver. If set to Off, this setting disables
Standby mode in the General settings menu.

A5 Loading

This determines the orientation used when printing on A5 paper.
Available options:
•
Long Edge—The printer will print A5-size paper in the long-edge feed orientation from all trays.
• Short Edge—The printer will print A5-size paper in the short-edge feed orientation from all trays.
to save the setting, or press X to return to the Configuration
Service menus
151
4514-6xx