Option Tray Acm Motor Service Check; Option Tray Controller Card Service Check - Lexmark MS510 Service Manual

Action
Step 3
Check the separator roll assembly for wear or damage.
Is it free of wear or damage?

Option tray ACM motor service check

Action
Step 1
Check the cable J11 on the option tray controller card.
Is it properly connected?
Step 2
a
Remove the option tray insert and bypass the tray present sensor.
b
POR into the Diagnostics Menu and perform a feed test:
Diagnostics Menu > Feed Test > choose an option tray
c
Check the ACM for proper operation.
Does the ACM freely rotate three times before displaying a jam message?
Step 3
Is the ACM gear free of wear or damage?

Option tray controller card service check

Action
Step 1
Check all connections to the option tray controller card.
Are the properly connected?
Step 2
Check printer's firmware level.
Is it up to date?
Step 3
Replace the option tray.
Does the error remain?
Yes
Contact the next level
of support.
Yes
Go to step 2.
Go to step 3.
Contact the next level
of support.
Yes
Go to step 2.
Go to step 3.
Contact the next level
of support.
Diagnostic information
128
4514-6xx
No
Replace the separator
roll assembly. See
"Separator roll
assembly removal" on
page 268.
No
Reseat the cable.
Replace the ACM
assembly. See "ACM
assembly removal" on
page 270.
Replace the ACM
assembly. See "ACM
assembly removal" on
page 270.
No
Reseat the cables.
Update the firmware.
The problem is solved.