Table of Contents
Advertisement
After cleaning replace the door glass panes
When replacing the glass panes make sure that
you replace the inner pane correctly as shown. The pane must be in the position
●
●
described below in order to fit into the door and to ensure that the oven operates safely
and correctly
you take extra care not to bump the edges of the glass against any object or surface
●
●
you do not force any of the panes into place. If you are experiencing difficulties
replacing the panes, remove them and start the process again from the beginning. If this
still does not help, call Customer Care.
Replace the middle pane
Ensure the pane is the right way up
(the warning should be readable at
the bottom of the door)
1 Ensure the rubber stoppers are still
attached at the top to the pane.
2 Slot the bottom of the pane into the
lower notch at the bottom of the door.
3 Lower the pane into the door, the rubber
stoppers rest on the outer pane of glass.
Replace the inner pane
Ensure the pane is the right way up
(ie the logo should be readable at the bottom of the door)
4 Slide the pane into the notch at the bottom of the door.
5 Lower the pane onto the clamp at the top of the door.
6 Slide the glass retainers back into place and ensure they are clipped securely in place.
IMPORTANT!
Make sure the glass retainers are correctly and firmly in place and the glass pane is
secure.
Upper notch
5
CARE AND CLEANING
4
Lower notch
Rubber stopper
1
3
6
2
41
Hide quick links:
Advertisement
Table of Contents
