Panasonic WH-SDF03E3E5 Series Design Handbook page 39

Easy operation
Easy maintenance
and assembly
Aquarea air / water heat pump – design handbook 07 / 2014
• control is by means of a wired controller inside the building
(15 m cable)
• simple programming via the controller
• Aquarea monobloc unit is equipped for safety reasons with
FI-circuit breakers:
- 2 FI RCD circuit breakers for 5, 6 and 9 kW units
- 3 FI RCD circuit breakers for 12, 14 and 16 kW units
only required on Phase-out models C,D & E series
• Monobloc system, no special space requirement inside the building,
no refrigerant connections
• easy opening of the unit for maintenance work
Maximum
Cooling mode
1
Minimum
Maximum
Heating mode
Minimum
valid for models with cooling mode
1
If the outside temperatures drop below the specified value, the heating
3
capacity decreases significantly. This can lead to the shutdown of the unit
due to internal safety functions.
Products, functions and technical data
Supply water
temperature (°C)
20
5
55 / 65
2
25
valid for Aquarea HT
2
Monobloc system
Outside
temperature (°C)
43
16
35
-20
3
39