Ohlins FG 670 Owner's Manual page 9

WARNING!
!
Releasing high pressure gas from the front
fork can be hazardous. Do not perform any
kind of service until gas pressure is com-
pletely released.
9.
Remove the circlip.
10.
Use tool 720-03 to lift up the reservoir end
cap. Install the tool 720-02 into the gas
piston.
11.
Use tool 1797-04 and 1765-03 to unscrew
the seal head from the cartridge tube.
Remove the piston rod unit.
12.
Fasten the piston rod in a vice. Use soft
jaws (727-02). Remove the nut with a 13
mm wrench or socket. Remove the valve
from the piston rod.
Place all parts, including the shims, in their
correct position on the work bench. Clean
all parts thoroughly and dry with com-
pressed air.
NOTE!
The right hand fork leg is the rebound leg.
The left hand fork leg is the compression
leg.
Notes
9 10
Tool 1765-03
11
Tool 1797-04
12
13 mm socket
Nut
Soft jaws
(727-02)
Tool 720-03
Tool 720-02
Piston rod unit
Seal head
Rebound Valve RH-Leg
Compression Valve LH-Leg
9