Download Print this page
Ohlins FGK 135 Mounting Instructions

Ohlins FGK 135 Mounting Instructions

Front fork kit for honda cbr600rr

Advertisement

Quick Links

Set-up Data
Recommended set-up:
Rebound adjustment
13 clicks
Compression adjustment ¾ turns
Spring preload
2 mm
Oil level
160 mm
Öhlins Front Fork fluid
Part No. 01309-01
Diagram - Oil Level - Force
400
375
350
325
300
275
250
225
200
175
150
125
100
75
50
25
0
0
10
20
30
40
50
60
Stroke [mm]
Öhlins products are subject to
To find the latest information contact
continuous improvement and
your Öhlins distributor. Please
development, therefore, although
consult your Öhlins dealer if you
these instructions include the most
have any questions regarding the
up-to-date information available at
the time of printing, minor updates
may occur.
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written
S-194 27 Upplands Väsby, Sweden
permission of Öhlins Racing AB
is prohibited.
Recommended sag and ride height:
The measures should not differ from the
following recommendations:
Without rider:
Rear
5 - 15 mm (R1-R2)
Front
20 - 30 mm (F1-F2)
With rider:
Rear
25 - 35 mm (R1-R3)
Front
30 - 40 mm (F1-F3)
400
140mm oil lev
375
150mm oil lev
350
160mm oil lev
325
170mm oil lev
180mm oil lev
300
190mm oil lev
275
200mm oil lev
250
210mm oil lev
225
220mm oil lev
200
230mm oil lev
175
240mm oil lev
150
125
100
75
50
25
0
70
80
90
100
110
120
contents in this document.
Part no. FGK135_5
Issued 2009-05-14
Öhlins Racing AB
Box 722
Phone +46 8 590 025 00
fax +46 8 590 025 80
www.ohlins.com
Front Fork Kit for Honda CBR600RR
FGK 135
Mounting Instructions
Before installing this product, check the
contents of the kit. If anything is missing, please
contact your nearest Öhlins dealer.
Kit Contents
Part No.
Pcs.
Front fork kit
FGK135
1
Öhlins Sticker (60x23) white 00191-32 2
Öhlins Sticker (60x23) blue
00191-33 2
Warning!
This kit should only be installed by an authorized
Öhlins dealer. The installation procedure requires
certain tools.
Please
note
that
during
storage
transportation, especially at high ambient
temperature, some of the oil and grease used for
assembling may leak and stain the packaging.
This is in no way detrimental to the product,
wipe off the excessive oil/grease with a cloth.
Warning!
Before installing this product, read the Öhlins
Owner's Manual. The front fork is an important
part of your vehicle and will affect the stability.
and

Advertisement

loading

Summary of Contents for Ohlins FGK 135

  • Page 1 Front Fork Kit for Honda CBR600RR Öhlins products are subject to To find the latest information contact FGK 135 continuous improvement and your Öhlins distributor. Please development, therefore, although consult your Öhlins dealer if you...
  • Page 2 Safety Precautions Adjustments Note! Warning! The front fork is a very important part of the Before riding, always make sure that the basic Decrease Increase Safety Symbols vehicle and will therefore affect the stability. settings made by Öhlins are according to In this manual, mounting instructions and recommended Set-up Data.
  • Page 3 Always check on the Öhlins web site Manual. Step 1 www.ohlins.com or with your Öhlins dealer/ distributor for the latest information. Put the motorcycle on a workstand so that Spring Preload - Free Sag - Ride Height Step 2 the front wheel barely touches the ground.
  • Page 4 2 - Disassemble Original Front Fork 3 - Install Öhlins Front Fork Kit Remove the original top cap from the fork leg. Make sure the piston shaft is in the bottom of the fork leg and that the outer fork leg is Top cap in the bottom position.