Advertisement
Quick Links
otte!
1
Please note that there can be small differences
between your product and the images in
these instructions.
otte!
1
Please note that during storage and transport,
especially at high ambient temperature, some
of the oil and grease used for assembly may
leak and stain the packaging. This will not cause
damage to the product, wipe off the excessive
oil or grease with a cloth.
Front Fork for Yamaha YZF-R1
FGRT 219
Mounting Instructions
Kit Conttnts
Dtscription
Front fork
Screw MC6S M5x10
Fender bracket front
Fender bracket rear
Sticker Öhlins
Owner's Manual
otte!
1
Before you install this product, check the kit
contents. If anything is missing, please contact
an Öhlins dealer.
⚠
arninge!
Before you install this product, read the Öhlins
Owner's manual. This product is an important
part of the vehicle and the vehicle stability.
Part
o
Pcs
FGRT219
1
01046-38
8
21665-09
2
21665-17
2
01196-02
1
07282-07
1
Advertisement
Related Manuals for Ohlins FGRT 219
Summary of Contents for Ohlins FGRT 219
- Page 1 This will not cause damage to the product, wipe off the excessive oil or grease with a cloth. Front Fork for Yamaha YZF-R1 FGRT 219 Mounting Instructions...
- Page 2 Mou tI g I stRuCtIo s ⚠ arninge! We strongly recommend to let an authorized Öhlins dealer install this product. ⚠ arninge! If you work with a lifted vehicle, make sure that it is safely supported to prevent it from tipping over. otte! When you work with this product, see the vehicle service manual for vehicle specific...
- Page 3 Mou tI g I stRuCtIo s Tighten: Put the vehicle on the ground, apply the front Upper triple clamp: 20 Nm brake and compress the front fork distinctly Lower triple clamp: 10 Nm 3-4 times. This will position the front fork legs parallell.
- Page 4 setuP Data spring Compression clicks Part Ratt ( /mm) Rebound clicks Spring preload 04744-95 (optional) Oil level 04744-90 (optional) Fork leg position Standard position 04744-10 (standard) 10.0 Öhlins Front fork fluid 01309-01 04744-05 (optional) 10.5 04744-11 (optional) 11.0 Rtcommtndtd sag and ridt htight o ridtr (Frtt sag) Front 15-30 mm (F1-F2)