Table of Contents
Advertisement
R41AC322
User's Guide
O If you print continuously for an extended period, the printing may be extremely slow.
This is to slow down the printing speed and prevent the printer mechanism from
overheating and being damaged. If this happens, you can continue to print, but we
recommend stopping and leaving the printer idle for more than 30 minutes with the
power on. (The printer does not recover with the power off.) After you restart, the printer
will print at normal speed.
O Uninstall the printer driver, then reinstall it.
& See "Uninstalling the Printer Software" on page 11
If you try all of the methods above and cannot solve the problem, see the following:
"Increasing the Print Speed (For Windows Only)" on page 168
Paper Does Not Feed Correctly
Paper does not feed
Remove the stack of paper and make sure of the following:
O The paper is not curled or creased.
O The paper is not too old. See the instructions that came with the paper for more
information.
O For plain paper, do not load paper above the H arrow mark inside the edge guide.
For Epson special media, make sure the number of sheets is less than the limit
specified for the media.
& See "Loading capacities for media" on page 17
O Paper is not jammed inside the printer. If it is, remove the jammed paper.
& See "The Paper Jams" on page 146
O The ink cartridges are not expended. If a cartridge is expended, replace it.
& See "Replacing an Expended Ink Cartridge" on page 113
O You have followed any special loading instructions that came with your paper. Load the
paper again.
& See "Loading Paper" on page 19
O The paper does not have any binder holes.
TRBLE.FM (A4 size) Rev.D
2010/02/02 14:19:33proofed
Troubleshooting
164
Advertisement
Table of Contents
