Table of Contents
Advertisement
R41AC322
User's Guide
Rated current
Power
consumption
Note:
Check the label on the back of the printer for its voltage.
Environmental
Temperature
Humidity
* Without condensation
Standards and approvals
U.S. model:
Safety
EMC
This equipment contains the following wireless module.
Manufacture: Marvell Semiconductor Inc.
Type: SP88W8786-MD0-2C2T00
This product conforms to Part 15 of the FCC Rules and RSS-210 of the IC Rules. Epson
cannot accept responsibility for any failure to satisfy the protection requirements resulting
from a non-recommended modification of the product. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation of the device.
0.6 A
Printing
Approx. 16 W
(ISO/IEC24712)
Ready mode
Approx. 4.2 W
Sleep mode
Approx. 3 W
Power off
Approx. 0.2 W
Operation:
10 to 35 °C (50 to 95 °F)
Storage:
-20 to 40 °C (-4 to 104 °F)
1 month at 40 °C (104 °F)
Operation:*
20 to 80% RH
Storage:* 5 to 85% RH
UL60950-1
CAN/CSA-C22.2 No.60950-1
FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B
SPEC.FM (A4 size) Rev.D
0.3 A
Approx. 16 W
(ISO/IEC24712)
Approx. 4.2 W
Approx. 3 W
Approx. 0.3 W
Product Information
New :Depends on model (See Spec)
190
Advertisement
Table of Contents
