Problem Solving Guide / After Sales Service - Miele S 4000 Series Operating Instructions Manual

Problem solving guide / After sales service

The vacuum cleaner switches off
automatically.
On certain models, the overheating
warning light also comes on.
A temperature limiter switch switches
the vacuum cleaner off automatically if
it gets too hot. Some models also have
a warning light , which comes on to
indicate that is has overheated.
This can occur if, for instance, large
articles block the suction tube or when
the filter bag is full or contains particles
of fine dust. A heavily soiled exhaust or
dust compartment filter can also be the
cause for overheating. Switch off the
vacuum cleaner using the On-Off
switch s. Disconnect from the
electricity supply. Switch off at the wall
socket and remove the plug.
After removing the cause, wait for
approximately 20 - 30 minutes to allow
the vacuum cleaner to cool down. It
can then be switched on again.
After sales service
In the event of a fault that you cannot
easily remedy, please contact
– your Miele Vacuum Cleaner
Specialist or
or
– the Miele Service Department (see
back cover for contact details).
Downloaded From Vacuum-Manual.com Manuals
32