Problem Solving Guide / After Sales Service - Miele S 858 Operating Instructions Manual

The vacuum cleaner has switched
itself off automatically.
A temperature limiter switches the
vacuum cleaner off automatically if it
gets too hot. The warning light , will
then come on to indicate that it has
overheated.
Overheating can occur if, for instance,
large articles block the suction tube or
the dustbag is full or contains particles
of fine dust. A heavily soiled exhaust or
dust compartment filter can also be the
cause of overheating. Switch off the
vacuum cleaner using the On-Off
switch.
After removing the cause, wait for a
period of approx. 20 - 30 minutes, to
allow the vacuum cleaner to cool down.
It can then be switched on again.
After Sales Service
In the event of a fault that you cannot
easily remedy, please contact
– your Miele Dealer, or
– the Miele Service Department
(see back cover for contact details).
When contacting your Dealer or the
Miele Service Department, please
quote the model and serial number of
your appliance. This information is
given on the data plate.
Please note that telephone calls may
be monitored and recorded for
training purposes.

Problem solving guide / After sales service

33