Miele S 4000 Series Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Vacuum Cleaner
  5. S 4000 Series
  6. Operating instructions manual
Miele S 4000 Series Operating Instructions Manual

Miele S 4000 Series Operating Instructions Manual

Operating instructions
Hide thumbs Also See for S 4000 Series:
Table of Contents

Advertisement

Quick Links

See also: Operating Instructions Manual

Operating instructions

Vacuum cleaners
S 4000 Series
To avoid the risk of accidents or damage
to the appliance, it is essential to read these
en - GB
instructions before using it for the first time.
These operating instructions apply to
standard models S 4211 - S 4781 as well as to
other S 4000 series vacuum cleaners
which are distinguished by names rather than numbers.
M.-Nr. 06 885 930

Advertisement

Table of Contents
loading

Related Manuals for Miele S 4000 Series

Summary of Contents for Miele S 4000 Series

  • Page 1: Operating Instructions

    These operating instructions apply to standard models S 4211 - S 4781 as well as to other S 4000 series vacuum cleaners which are distinguished by names rather than numbers. M.-Nr. 06 885 930...

  • Page 2: Table Of Contents

    Contents Caring for the environment Description of the appliance Warning and Safety instructions Preparing for use Using the accessories supplied Mains cable ............15 Switching on and off .

  • Page 3: Caring For The Environment

    Disposal of packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Ensure that any plastic, wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children.

  • Page 4: Description Of The Appliance

    Description of the appliance The illustration shows the maximum number of features available on these Miele vacuum cleaners. Certain models are supplied as standard with the following accessories which are not illustrated on this page. – ALLERGOTEC floorhead – Turbobrush –...
  • Page 5 Description of the appliance a Handle (some models have an air inlet valve in the handle) * b Suction power selector + / - * c Stand-by button for pauses in vacuuming * d LED * e Release button f Accessories holder * g Release buttons for the telescopic tube * h Dust compartment release button i Telescopic tube *...

  • Page 6: Warning And Safety Instructions

    Safety with children This vacuum cleaner is not a toy! To avoid the risk of injury, keep children well away, and do not allow them to play with it or to use the controls.
  • Page 7 If the cable is damaged it must be replaced together with a complete cable rewind. For safety reasons this must only be done by the Miele Service Department or a Miele authorised ser- vice technician. While the vacuum cleaner is under...
  • Page 8 Do not vacuum toner dust. Toner, such as that used in printers and photocopiers, can conduct electricity. The filter system in the vacuum cleaner may not filter it completely, causing the toner to be blown back into the room by the fan.
  • Page 9 Accessories In the UK, Miele accessories including floorheads, filters and dustbags are available to order from your Dealer, the Miele Spare Parts Department or via the internet on www.miele.co.uk. To avoid the risk of injury when vacuuming with a Miele Electrobrush or Turbobrush, do not touch the rotating roller brush.

  • Page 10: Preparing For Use

    Preparing for use Attaching the suction hose ^ Insert the hose connector into the socket until it clicks into position. To do this, line up the guides on the two pieces. To remove the suction hose from the cleaner ^ Press the release buttons at the side of the hose connector, and lift the hose from the socket.

  • Page 11: Adjusting The Telescopic Suction Tube

    Your vacuum cleaner is fitted with one of the following types of suction tube, depending on the model: – Connecting tubes (fixed height) – 2-part telescopic tube – Triscopic telescopic tube Connecting the 2-part fixed height tubes Both sections of the suction tube have locating arrows marked on them.

  • Page 12: Fitting The Standard Floorhead

    For hard flooring, such as stone and parquet, we recommend using one of the special Miele floor brushes (see "Optional extras"). It is also important to observe the flooring manufacturer’s cleaning and care instructions.

  • Page 13: Using The Accessories Supplied

    Using the accessories supplied The following accessories are supplied: a Crevice nozzle b Dusting brush (depending on model) c Upholstery nozzle d Accessory holder for 2 or 3 of the above accessories e Filter grille The filter grille is supplied in the box with models which are fitted with Active Air Clean or Active HEPA filters as standard.
  • Page 14 Using the accessories supplied Upholstery nozzle For cleaning upholstery, mattresses, cushions, curtains, covers etc. Accessories holder ^ Attach the accessories holder to the upper part of the suction tube when required. Floorhead For general use and also for vacuuming the stairs.

  • Page 15: Use

    Mains cable Unwinding the cable ^ Pull out the mains cable to the required length (max. approx. 5.5 m). Warning: If vacuuming for longer than 30 minutes, the mains cable must be pulled out to its fullest extent. Otherwise there is a danger of overheating and damage.
  • Page 16 Certain models have controls on the handle which transmit radio signals to the vacuum cleaner. The stand-by indicator on the vacuum cleaner will light up when the vacuum cleaner is ready to use. To pause the appliance during operation: ^ Press the stand-by button on the handle.

  • Page 17: Regulating The Suction

    Vacuuming ^ When vacuuming, pull the cleaner behind you on its wheels. You can stand it upright for vacuuming stairs and curtains etc. Warning: When vacuuming especially fine dust, e.g. sawdust, sand, plaster, flour, talcum powder etc., electrostatic charges build up naturally.
  • Page 18 Rotary selector ^ Turn the suction power selector manually to the suction power setting you require. + / - foot controls Press the controls to select the suction power you require. ^ Press the + control to select a higher setting.

  • Page 19: Opening The Air Inlet Valve

    It is easy to reduce the suction power for a short time, e.g. to prevent rugs or other objects being sucked into the vacuum cleaner. ^ Open the air inlet valve far enough to reduce the suction power. The floorhead will be easier to manoeuvre.

  • Page 20: Setting Down, Transportation And Storage

    ^ Slot the floorhead into the parking attachment at the back of the vacuum cleaner. Transportation and storage ^ Stand the vacuum cleaner upright when it is not being used and during storage. ^ Slot the floorhead downwards into the parking attachment on the side of the vacuum cleaner.

  • Page 21: Maintenance And Care

    Switch off at the wall socket and remove the plug. If using the ACCU NOVA floorhead, switch this off as well. The Miele filter system consists of three filters which must be replaced from time to time to ensure that your cleaner performs efficiently.

  • Page 22: When To Change The Dustbag

    ^ Switch the vacuum cleaner on and select the highest power setting. ^ Lift the floorhead off the floor a little. If the marker completely fills the...

  • Page 23: Replacing The Dustbag

    Replacing the dustbag ^ Press the release button for the dust compartment lid and raise the lid as far as it will go. ^ To remove the dustbag hold the bag by the collar and pull it out of its holder.

  • Page 24: When To Change The Exhaust Filter

    Super Air Clean filter, Replace this filter every time you start a new packet of Miele dustbags. A Super Air Clean exhaust filter and a dust compartment filter are supplied with every packet of Miele dustbags.

  • Page 25: Replacing The Super Air Clean Filter

    Replacing the Super Air Clean filter ^ Open the dust compartment lid. ^ Release the filter grille and raise it upwards. Grasp the used Super Air Clean filter by the clean, unsoiled section (see arrow) and take it out. ^ Replace it with a new Super Air Clean filter.

  • Page 26: Replacing The Active Air Clean Or Active Hepa Filter

    It should click into place. Re-setting the exhaust filter change indicator If your vacuum cleaner is fitted with an exhaust filter change indicator, this needs to be re-set each time the filter is replaced. To do this the vacuum cleaner must be connected to the electricity supply.

  • Page 27: Replacing One Type Of Filter With Another

    The filter change indicator light is irrelevant if a Super Air Clean filter is being used, as long as it is replaced every time a new packet of Miele dustbags is started. The indicator light will go out when the reset button is pressed.

  • Page 28: When To Change The Dust Compartment Filter (For Motor Protection)

    Replace this filter every time you start a new packet of dustbags. A dust compartment filter is supplied with every packet of Miele dustbags. How to change the dust compartment filter ^ Open the dust compartment lid. ^ Unclip the filter frame.

  • Page 29: How To Change The Battery In The Radio-Operated Handle

    Take out the roller. Remove any threads and hair, replace the roller and refit the bearing. Spare parts are available from your Miele dealer or from the Miele Spare Parts Department (see back cover for contact details). Maintenance and care...

  • Page 30: Cleaning And Care

    E-Cloth A microfibre "E-Cloth" is available from the Miele UK Spare Parts Department, Part Number 98013530, which is suitable for cleaning surfaces such as stainless steel, glass, plastic and chrome without the use of chemicals. It can be washed 300 times.

  • Page 31: Problem Solving Guide / After Sales Service

    After sales service In the event of a fault that you cannot easily remedy, please contact – your Miele dealer, or – the nearest Miele Service Department. (See address on back page). Please note that telephone calls may be monitored and recorded for training purposes.

  • Page 32: Optional Accessories

    Optional accessories In the UK, Miele accessories including floorheads, filters and dustbags are available to order from your Dealer, the Miele Spare Parts Department or via the internet on www.miele.co.uk. Certain models are supplied as stan- dard with one or more of the following...
  • Page 33 Optional accessories ACCU NOVA floorhead The ACCU NOVA floorhead is driven by a separate motor, and is particularly suitable for the intensive cleaning of heavily soiled textile floor surfaces. It is very effective at removing deep seated dirt and preventing areas of frequent use being trodden into a path.
  • Page 34 Optional accessories SBB 235-3 Hard floor brush This brush is designed for use on hard flooring such as tiled or stone floors. Parquet floor brush This brush has natural bristles and is designed for use on parquet floors and other surfaces which are susceptible to scratching such as laminate flooring.
  • Page 35 Optional accessories Universal brush For dusting books, shelves, etc. Dusting brush For cleaning skirting boards, ornate or carved articles, etc. Dusting brush with natural bristles This brush is suitable for particularly delicate objects. Radiator brush (Can only be used if attached to the crevice nozzle).
  • Page 36 Optional accessories Mattress nozzle For cleaning upholstery, mattresses, cushions, curtains, covers etc. Crevice nozzle (300 mm) For cleaning in folds, crevices or corners. Micro Set This set is specially designed for cleaning small objects and difficult to reach areas (such as PC keyboards, stereo equipment, intricately carved furniture and ornaments, models etc).
  • Page 37 CarClean Set Plus The CarClean Set Plus has been designed as an accessory for Miele cylinder vacuum cleaners for valeting the interior of cars. It consists of: – Hand-held Turbobrush – Micro-hose with combination nozzle (crevice nozzle and dusting brush) –...
  • Page 38 The Active HEPA filter replaces the filter fitted in the vacuum cleaner. Do not use aroma capsules in your cleaner if you use either of these filters. The charcoal in them will absorb their aroma, rendering them ineffective.

  • Page 39: Electrical Connection For The Uk

    (BS 7671 in the UK). The voltage and connected load are given on the data plate located underneath the vacuum cleaner. Please ensure that these match the household mains supply. The fuse rating is quoted on the plug.
  • Page 40 Alteration rights reserved / (S4211- S4781) - 1107 M.-Nr. 06 885 930 / 05...

This manual is also suitable for:

S 4211S 4781

Table of Contents