Miele S 4000 Series Operating Instructions Manual page 16

Use
Models with radio controls
To pause the appliance during
operation:
^ Press the stand-by button on the
handle.
,
The stand-by button is designed
to pause the vacuum cleaner for
short periods of time whilst
vacuuming. There is a risk of
overheating or damage if left in
stand-by mode for too long.
An LED will indicate each time a button
is pressed on the handle.
At the end of the pause you can do one
of the following:
^ Press the stand-by button again to
switch the vacuum cleaner back on
at the setting you were using before
pausing it.
^ Press the + button to switch the
vacuum cleaner back on using the
highest power setting.
^ Press the - button to switch the
vacuum cleaner back on using the
lowest power setting.
Downloaded From Vacuum-Manual.com Manuals
16