Problem Solving Guide / After Sales Service - Miele S 700 Operating Instructions Manual

Problem solving guide / After sales service

The vacuum cleaner switches off
automatically.
A temperature limiter switches the
vacuum cleaner off automatically if it
gets too hot.
This can occur if, for instance, large
articles block the suction tube or when
the filter bag is full or contains particles
of fine dust. A heavily soiled exhaust or
dust compartment filter can also be the
cause of overheating. Switch the
vacuum cleaner off immediately using
the On/Off switch. Disconnect from the
electricity supply. Switch off at the wall
socket and remove the plug.
After removing the cause, wait for
approx. 20 - 30 minutes to allow the
vacuum cleaner to cool down. It can
then be switched on again.
After sales service
In the event of a fault that you cannot
easily remedy, please contact
– your Miele Dealer
or
– the nearest Miele Service
Department (see address on back
page).
Please note that telephone calls may
be monitored and recorded for
training purposes.
Downloaded From Vacuum-Manual.com Manuals
28