Problem Solving Guide / After Sales Service - Miele S 7000 Series Operating Instructions Manual

The vacuum cleaner switches off
automatically.
Vacuum cleaners with a rotary selector
dial: The vacuum cleaner in-operation
indicator lights up red.
Vacuum cleaners with + / - buttons: The
thermal cut-out indicator lights up red.
The overheating protection mechanism
has been activated by the appliance
overheating or because of a blockage.
^ Switch the Electrobrush and the
vacuum cleaner off, switch it off at
the wall socket and withdraw the
plug.
^ Check the cleaner for any blockages,
and all the filters in the vacuum
cleaner.
Do not use the vacuum cleaner for
about 20-30 minutes to allow it to cool
down.
The Electrobrush switches off
automatically. The Electrobrush
indicator lights up red.
The red lamp indicates a blockage in
the roller, for example, because a large
object has been vacuumed up.
^ Switch the Electrobrush and the
vacuum cleaner off, switch it off at
the wall socket and withdraw the
plug.
^ Remove the blockage.
The vacuum cleaner can then be used
again.

Problem solving guide / After sales service

The Electrobrush switches off
automatically. The Electrobrush
indicator stays yellow.
The overheating protection mechanism
has been activated by the appliance
overheating or because of a blockage.
^ Switch the Electrobrush and the
vacuum cleaner off, switch it off at
the wall socket and withdraw the
plug.
^ Check the cleaner for any blockages,
and all the filters in the vacuum
cleaner.
The Electrobrush has to cool down. To
speed this up:
^ Switch the vacuum cleaner back on.
^ Vacuum for about 10 minutes without
switching the Electrobrush on.
This will cool the Electrobrush down
and it can then be used again as
normal.
After sales service
In the event of a fault that you cannot
easily remedy, please contact
– your Miele retailer
or
– Miele (see back cover for contact
details).
Please note that telephone calls may
be monitored or recorded for training
purposes (UK only).
35