Miele S 4000 Series Operating Instructions Manual page 12

Preparing for use
Fitting the standard floorhead
^ Push the suction tube into the
floor-head and turn it clockwise or
anti-clockwise until it clicks into
position.
^ To release the floorhead from the
suction tube, press the locking button
(see arrow) and pull the suction tube
away from the floorhead.
The floorhead can be used for all
normal cleaning of carpets and rugs.
For hard flooring, such as stone and
floors which are susceptible to
scratching, e.g. parquet, we
recommend using the special Miele
floor brush (see "Optional
accessories").
It is also important to observe the
flooring manufacturer's cleaning and
care instructions.
Vacuum carpets and rugs with the
brush retracted:
^ Press the foot switch
Clean hard flooring which is not
susceptible to scratching with the brush
protruding:
^ Press the foot switch
The Classic Allergotec floorhead and
the Turbobrush
Some models may be supplied as stan-
dard with one of these accessories
("see Optional accessories"). Please
refer to the seperate operating
instructions supplied with these
brushes for instructions on use and
maintenance.
Downloaded From Vacuum-Manual.com Manuals
12
ö
.
ä
.