When To Change The Thread Lifters; To Replace The Thread Lifters - Miele S 4000 Series Operating Instructions Manual

Maintenance and care
When to change the thread
lifters
The thread lifters on the suction inlet to
the floorhead and upholstery nozzle
can be replaced. Check them from time
to time and replace them if the pile has
worn down.

To replace the thread lifters

^ Use a suitable tool to remove them
from the slots.
^ Fit new thread lifters.
Upholstery nozzle, 190 mm
^ Release the thread lifting unit on both
sides of the upholstery nozzle using a
coin.
^ Replace the thread lifters.
If threads or hair have wound round
the bearing on the floorhead roller
a Release the bearing (with bayonet
fitting) using a coin.
b Press the bearing out, and remove.
c Remove the roller.
Remove any threads and hair, replace
the roller and refit the bearing.
Spare parts are available from your
Miele Vacuum Cleaner Specialist or
from the Miele Spare Parts Department
(see back cover for contact details).
Downloaded From Vacuum-Manual.com Manuals
30