Toshiba E-STUDIO 350 User Functions Manual page 51

4
Enter the 5-digit code in the "New Code"
field using the digital keys, and then press
the [SET] button to set the entry.
- If you enter the code, asterisks (*) appear in the "New Code" field.
- If you want to clear the code to retype it, press the [CLEAR] button
on the Control Panel.
- After pressing the [SET] button, the "Retype New Code" field is
highlighted.
The department code must be the 5-digit code except "00000".
5
Enter the 5-digit code again in the "Retype
New Code" field using the digital keys,
and then press the [SET] button to set the
entry.
- If you enter the code, asterisks (*) appear in the "Retype New
Code" field.
- If you want to clear the code to retype it, press the [CLEAR] button
on the Control Panel.
If you want to return to the "New Code" field to retype it, press the
[RESET] button.
6
Press the [ENTER] button at the bottom of
the touch panel.
- The LIMITATION screen is displayed.
7
Set the limitation of this department code
as required.
- Press the [ON] button to enable the output limitation for this
department code. When you select the [ON] button, press the
"Limitation" field and enter the maximum number of the outputs
for this department code using the digital keys. You can enter up
to "99999999". If you do not set the output limitation for outputs,
press the [OFF] button.
If you enter "0" for the limitation, it will disable printing any copies or
prints using this department code.
8
Press the [ENTER] button.
- New department code is registered.
2
49