Setting The Rx Printing - Toshiba E-STUDIO 350 User Functions Manual

Setting the RX Printing

Setting Discard and Reduction Printing
Set print settings for received fax and Internet Fax originals that are to be printed.
Two print settings are available: discard printing and reduction printing.
Discard Printing: ON, OFF
- ON (default setting):
When originals are up to 10mm larger than the printing area; the part of the originals that exceeds the
paper printing area is discarded.
- OFF: The received original is printed on two sheets of paper if its length exceeds the paper printing area.
* For detail of DISCARD setting, contact your service technician.
RX Reduction Printing: ON, OFF
- ON (default setting):
If the received original is longer than the recording paper, it will be vertically reduced to 90% to fit on the
recording paper.
- OFF: The received original is printed on two sheets of paper if its length exceeds the paper printing area.
* Only drawers can be set for received FAX printing. Please see the Operator's Manual for Basic
Functions. Be sure to use LD, LG, LT, LT-R, A3, A4, A4-R or B4.
1
Press the [FAX] button in the ADMIN
menu.
- The FAX menu is displayed.
To display the ADMIN menu, see "1.ENTERING TO ADMIN MENU".
Page 78
2
Press the [RX PRINT] button.
- The RX PRINT screen is displayed.
4
117