Siemens SINAUT MD720-3 System Manual page 68

Service functions
Setup the Local Service Connection
When the modem driver and the network connection are installed and the SINAUT
MD720-3 is connected to the COM-Port of the PC, the service connection can be
established. Activate the service mode and continue as follows:
1. Open the Start Menu.
2. Select the new connection (e.g. Service-MD720) in the menu Connect to.
3. Enter the user name (default: service) and the password (default: service) and
click Dial.
4. The connection will be established. After the connection is established an Icon
appears in the Windows taskbar.
5. In the Start Menu click All Programs, Accessories, Command Prompt.
6. Enter the following command line: C:\WINDOWS>ftp 192.168.0.8
Press Enter.
7. You will be asked for a User name (default: service) and a password (default:
service). Enter both and observe capital or small characters.
8. If the connection is established successfully the message „230 User logged in"
appears and the prompt changes to Ftp>.
68
SINAUT MD720-3
C79000-G8976-C211