Siemens SINAUT MD720-3 System Manual page 44

SINAUT MD720-3 in Terminal Mode
<mem3>.
AT+CNUM Subscriber number
Test
Command: AT+CNUM=?
Response: OK
Executive command
AT+CNUM
Command:
Response: +CNUM: [<alpha1>],<number1>,<type1>[,<speed>,<service>[,<itc>]]
[<CR><LF>+CNUM: [<alpha2>],<number2>,<type2>[,<speed>,<service>
[,<itc>]]
[...]]
OK
Parameter: <alpha>:
optional alphanumeric string associated with <number>; used character set should be the
one selected with command Select TE Character Set +CSCS
<number>:
string type phone number of format specified by <type>
<type>:
type of address octet in integer format (refer GSM 04.08 [8] subclause 10.5.4.7)
<speed>:
<service>:
service related to the phone number
0:
1:
2:
3:
4:
5:
also all other values below 128 are reserved by the present document
<itc>:
information transfer capability
0:
1:
Notice: Action command returns the MSISDNs related to the subscriber (this information can be
stored in the SIM or in the ME)
The Read Command (AT+CNUM?) returns an error
Example:
AT+CNUM
44
asynchronous modem
synchronous modem
PAD Access (asynchronous)
Packet Access (synchronous)
voice
fax
3.1kHz
UDI
+CNUM: "TEL","0612345678",129
+CNUM: "","",255
+CNUM: "","",255
+CNUM: "","",255
OK
SINAUT MD720-3
C79000-G8976-C211